Khatod High Tecnology, Best Quality Service: This Is Our Must
Khatod
is the unique company on the international scene that specifies and
develops the entire product process 100% in-house. Since 1985, Khatod
has held all of its operations in its headquarter (Milano, Italy) a
full optical service - from project to object - encompassing optical
and mechanical designs, mould fabrication, injection moulding, test and
inspection, as well as the time to market, are under our full control.
Our quality starts from close collaboration with selected suppliers,
world leaders in plastic materials, control instruments, and machines
for polymers transformation process.
Most
of the technologies used to produce our millions of parts per month,
are created by our team of engineers who develop our new, technically
unique products as well as creating the necessary tooling and equipment
to manufacture them.
The
latest evolution in LED Technology has resulted in new devices such as
the COB LEDs – Chip On Board LEDs - which allow a huge variety of new
and innovative applications in Lighting.
The high luminosity of the COB LEDs is achieved through a unique packaging in the tightest space.
This
high-level packaging density of the LED chips allows to perform high
intensities while delivering a perfect homogeneous flux. However, as any
LED source, also the COB LEDs need a proper optical solution to
optimize their high power for a brilliant performance.
Khatod, a real front-runner in Lighting solutions, as usual, has
immediately intercepted this new demand from the Lighting market, and is
proud to unveil its latest creation: LYRA Optical Reflector Systems (ORS) for the new generation of High Brightness COB LEDs.
Reflectors are currently used in optical systems to maximize both illumination and high efficiency.
However, in order to deliver the best optical performance, they need the highest manufacturing technology.
Today, we are proud to announce that, since the beginning of 2012
Khatod has equipped its Production Department with the most advanced
vacuum treatment plant based on the latest cutting-edge VACUUM COATING
TECHNOLOGIES, specific for coating our Optical Reflector Systems for LED
applications.
Always in the same spirit: 100% in-house, under our full control, from project to object, our aim is to deliver our customers the highest quality level.
The realization of our vacuum treatment plant has been carried out
in collaboration with the R&D of one of the most important companies
of the industry, operating worldwide. They have been market leader in
the high-vacuum treatment since 1950, and are owners of dozen
international patents for PVD, Physical Vapour Deposition.
Our vacuum treatment plant is not a common equipment for general use, as most of the coating plants available on the market. Instead, our plant is customized for specific optical treatments. It has been projected and realized exclusively for the specific coating of optical reflectors for LED applications.
This allows to achieve superior optical performances, up to 37%
higher than the optical efficiency of the common reflectors currently
treated through a standard coating process. Also, such innovative
technologies allow the treatment of plastic materials of new generation,
heat-resistant over 250°C (482°F), because the vacuum ensures the ideal
conditions needed for a perfect uniform and compact coating.
The
treatment process includes also the Plasma technology. Plasma is the
fourth state of the matter, a gas which can be partially or totally
ionized, consisting of free charged particles, such as neutral
molecules, ions and electrons, simultaneously present. In this case,
Plasma stays for “low energy content“: a higher or a lower energy
content defines a “cold” Plasma or a “hot” Plasma.
Cutting-edge technologies as well as innovative proceedings
introduced in our project and production processes not only provide our
engineers and technicians with the highest technological level, but also enhance their engineering potentialities which will result in the highest product quality level.
The entire treatment process is made of four working operations.
That is a longer working cycle than usual. However, the innovative
technologies for the creation of vacuum allow to keep the costs
competitive. Every part produced is not only a hi-tech product but also a
cost-effective solution.
A further key issue is the ZERO ENVIRONMENTAL IMPACT of the new Vacuum Treatment Plant from Khatod, totally complying with RoHS and ELV Standards.
Our commitment with the Environment Preservation is an essential part of our company philosophy.
By
using these new technologies, we have achieved approx 30% reduction in
energy consumption. Also, Khatod Vacuum Treatment Plant exclusively uses
organic materials and it emits no waste substances that can pollute the
environment and disrupts the climate. Its working operations are
totally ZERO EMISSION.
And that’s not all! In the second half of 2012, Khatod will also be able to supply PECVD treated products.
Our commitment with the Environment Preservation is an essential part of our company philosophy.
By
using these new technologies, we have achieved approx 30% reduction in
energy consumption. Also, Khatod Vacuum Treatment Plant exclusively uses
organic materials and it emits no waste substances that can pollute the
environment and disrupts the climate. Its working operations are
totally ZERO EMISSION.
And that’s not all! In the second half of 2012, Khatod will also be able to supply PECVD treated products.
Plasma Enhanced Chemical Vapour Deposition
(PECVD) is an innovative process coming from the most advanced
technologies. It allows a specific transparent anticorrosive treatment,
carried out in full respect, preservation and protection for
Environment.
We
are proud to be able to deliver our customers the most cutting-edge
technologies, either for CUSTOM applications or for all our standard
products.
Optical Engineering
+
Mould Engineering & Realization
+
Plastic Injection Production Process
+
Coating Treatments
=
100% IN-HOUSE
=
KHATOD
Khatod,
a unique Supplier with full and direct control on all the processes
carried out in its own facilities, able to guarantee the highest
reliability, quality, flexibility, confidentiality, short lead time.
From project to object, the most reliable solution-maker in Lensing for High Power LEDs,
all in house.
Manufacturer of Solutions, ... since 1985.
The 2012 LEDInside AURORA AWARD announces that the WINNER is NACTUS 101
